Alloy 24 Port POE VoIP Switch with 2 uplink ports

///Alloy 24 Port POE VoIP Switch with 2 uplink ports
  • alloy_24_port_poe_voip_switch_1

Alloy 24 Port POE VoIP Switch with 2 uplink ports

$580.00

POEFEM24T2SFP 26-Port Managed PoE Fast Ethernet Switch

Categories: , .

Product Description

The POEFEM24T2SFP features 24 PoE compliant ports running at 10/100Mbps and 2 uplink ports in a paired mini-GBIC (SFP) and Copper /10/100/1000Mbps configuration. This switch is designed for high port density PoE applications such as VoIP phone deployment or IP security camera environments.

The Intelligent Layer 2 SNMP management features enable reliable transport of critical VoIP and Security data, even in congested network environments. VoIP requires prioritisation of Voice Calls over general Network Data and Security system requires not only prioritisation, but also port based link security and reporting of link failures to intelligent SNMP applications. These and other intelligent network features are all supported from the POEFEM24T2SFP switch.

The POEFEM24T2SFP supports the IEEE 802.3af PoE standard for Power Injection (PSE). This injects PoE power onto the Cat5 Cable when it detects the presence of a PoE complaint device. When operating with non PoE devices the switch will shut down the power injecting circuitry and as such not cause any damage to your network devices but still allow them to run on the switch as in the case of a normal Ethernet device. The POEFEM24T2SFP uses a injection voltage of about 48VDC on pins 1, 2, 3, 6.

Other Intelligent Network features offer a complete management solution that can enable you to scale your network from a single departmental switch right up to any Enterprise environment. STP and RSTP offers network redundancy features, IGMP snooping offers support for Streaming Video and Multicasing images, Tagged Vlan offers logical security and management of nodes within defined groups. QOS based on port priority queues and TOS bytes ensure effient forwarding of critical network data.

ONETEC also offers a complete range of Fibre SFP / Mini GBIC modules for distances from 220 meters to 100Kms.

Product Features:

  • 24x Ports 10/100Mbps TP and 2x Ports Paired Gigabit TP/SFP
  • Supports 24x ports 10/100M TP ports with Nway and auto MDIX function indication
  • Supports hot swapping of SFP transceiver modules
  • Non-blocking, store-and-forward and shared-memory switching technology
  • Supports auto-negotiation for configuring speed and duplex settings
  • Supports 802.3x flow control for full-duplex ports
  • Supports collision-based and carrier-based backpressure for half-duplex ports
  • 256-entry Multicast Address table
  • Any port can be disabled, forced to a particular speed or set to NWay mode
  • Per-port ingress/egress rate control with 64K/128K/256K (up to 100Mbps) resolution
  • Supports Head of Line (HOL) blocking prevention
  • Supports broadcast storm filtering
  • 8K MAC addresses with automatic learning and aging
  • Auto-aging with programmable inter-age time
  • Supports 802.1p Class of Service with 4-level priority queuing
  • Supports port mirroring function with 3 modes:
  • (TX Monitor Mode, RX Monitor Mode and TX-RX pair Monitor Mode)
  • Supports port-based VLAN, 802.1Q tag-based VLAN with up to 256 entries
  • Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
  • Web-based management provides the ability to completely manage the switch from any web browser
  • SNMP/Telnet interface delivers complete in-band management
  • Supports IEEE 802.1d Spanning Tree Protocol
  • Supports ingress port security mode for VLAN Tagged and Untagged frame process
  • Supports SNMP MIB2 and RMON sampling with sampled packet error indication
  • 24 ports of IEEE 802.3af compliant PoE PSE Ports
  • Endpoint with 48VDC power through RJ-45 pins 1, 2, 3, 6
  • Powered Device(PD) auto detection and classification
  • Supports IEEE 802.1w Rapid Spanning Trees
  • Supports IEEE 802.1x port-based network access control
  • Supports IP Multicasting to implement IGMP Snooping function
  • Supports 802.3ad port trunking with flexible load distribution and failover function
  • PoE-PSE status and activity LED indicator
  • Smart feature for PD on/off, class, feeding priority

Product Specification:

Standard Compliance

  • IEEE802.3/802.3ab / 802.3z / 802.3u / 802.3x/ 802.3af

Transmission Mode

  • 1000Mbps support full duplex only
  • 10/100/1000Mbps for TP
  • 1000Mbps for Fibre


Full Forwarding/Filtering Packet Rat

  • 1000Mbps: 1,488,000PPS
  • 100Mbps: 148,800PPS
  • 10Mbps: 14,880PPS

MAC Address and Self-learning

  • 8K address table entries
  • 256 VLAN table entries
  • 256 IP multicast table entries

Buffer Memory

  • Embedded 256KB packet buffers and 128KB control memory

Flow Control

  • IEEE802.3x compliant for full duplex
  • Backpressure flow control for half duplex

Cable and Maximum Length

  • TP: Cat. 5e UTP cable, up to 100m
  • 1000Base-SX: Up to 220/275/500/550m, depending on Multi-Mode Fibre used
  • 1000Base-LX SC: Single-Mode Fibre, up to10/30/50Km
  • 1000Base-FX WDM SC S-M: Single Fibre, BiDi 20Km

Diagnostic LED

  • System LED: Power, CPURUN, ACT (LEDSET), FDX (LEDSET), SPD (LEDSET)
  • Per Port LED:
  • 10/100M TP Port 1 to 24: LINK/ACT, FDX, SPD
  • 1000M Fibre/TP Port 25,26: LINK/ACT, FDX, SPD

Power Requirement

  • Voltage: 100 – 240 V AC
  • Frequency: 50 – 60 Hz
  • Consumption: Max:
  • 12W ( when no PD devices are connected)
  • Max. 185W ( POE connections: 12ports @ 15.4W or 24ports @ 7.7W )

Ambient Temperature

  • 0 to 50 degrees C

Humidity

  • 5% to 90%

Dimensions

  • 44(H) x 442(W) x 209(D) mm


Compliance

  • FCC Part 15 Class A, CE Mark Approval & C-Tick

Reviews

There are no reviews yet.

Be the first to review “Alloy 24 Port POE VoIP Switch with 2 uplink ports”